CS-65R, CS-65D, CS-65N, CS-65P, CS-65RP
SPECIFICATIONS
Type | CS-65R | CS-65D | CS-65N | CS-65P | CS-65RP |
Wiring Method | 2-Wire Type | 2-Wire Type | 3-Wire Type | 3-Wire Type | 3-Wire Type |
Switching Logic | SPST, Normally Open | Solid State Output, Normally Open | Solid State Output, Normally Open | Solid State Output, Normally Open | SPST, Normally Open |
Sensor type | Reed Switch | - | NPN Current Sinking | PNP Current Sourcing | Reed Switch |
Operating Voltage | 5~240V DC/AC | 10~28V DC | 10~28V DC | 10~28V DC | 10~30V DC/AC |
Switching Current | 100mA max. | 50mA max. | 200mA max. | 200mA max. | 500mA max. |
Contact Rating (NOTE 1) | 10W max. | 1.5W max. | 5.5W max. | 5.5W max. | 10W max. |
Current Consumption | - | - | 10mA@24V DC max. | 10mA@24V DC max. | 10mA@24V DC max. |
Voltage Drop | 3.0 V max. | 3.5 V max. | 1.5 V max. | 1.5 V max. | 0.1V@100mA max. |
Leakage current | - | 0.8 mA max. | 0.05 mA max. | 0.05 mA max. | - |
Indicator | Red LED | Red LED | Red LED | Yellow LED | Yellow LED |
Cable | Ø2.8, 2C, PU | Ø2.8, 2C, PU | Ø2.8, 3C, PU | Ø2.8, 3C, PU | Ø2.8, 3C, PU |
Operating Frequency | 200Hz | 1000Hz | 1000Hz | 1000Hz | 200Hz |
Magnet Requirement (NOTE 2) | 65 Gauss | 50 Gauss | 50 Gauss | 50 Gauss | 65 Gauss |
Temperature Range | -10~70℃ (+14~158℉) | -10~70℃ (+14~158℉) | -10~70℃ (+14~158℉) | -10~70℃ (+14~158℉) | -10~70℃ (+14~158℉) |
Shock (NOTE 3) | 30 G | 50 G | 50 G | 50 G | 30 G |
Vibration (NOTE 4) | 9 G | 9 G | 9 G | 9 G | 9 G |
Enclosure Classification | IEC 60529 IP67 (NEMA6) | IEC 60529 IP67 (NEMA6) | IEC 60529 IP67 (NEMA6) | IEC 60529 IP67 (NEMA6) | IEC 60529 IP67 (NEMA6) |
Protection Circuit (NOTE 5) | 1 | 2 | 2, 3, 4 | 2, 3, 4 | 1 |
NOTE:
- WARNING: Never exceed rating (Watt=Voltage x Amperage). Permanent demage to sensor will occur.
- Measuring standard target: ø15.5Xø8X5t (Anisotropy rubber magnet)
- Sin wave / X , Y , Z 3 directions / 3 times each direction / 11 ms each time.
- Double amplitude 1.5 mm / 10Hz~55Hz~10Hz (Sweep 1 min) / X , Y , Z 3 directions / 1 hour each time.