SPECIFICATIONS
| Type | CS-1000D |
| Wiring Method | 2-Wire Type |
| Switching Logic | Solid State Output, Normally Open |
| Sensor type | -- |
| Operating Voltage | 10~28V DC |
| Switching Current | 5-50mA max. |
| Contact Rating (NOTE 1) | 1.5W max. |
| Current Consumption | -- |
| Voltage Drop | 5V max. |
| Leakage current | Less Then 1 mA |
| Indicator | Red LED:unstable sensing range Green LED: stable sensing range |
| Cable | Ø5.4, 2C, PVC |
| Operating Time | 50 ms max. |
| Magnetic Field Resistance (NOTE 5) | 16000A |
| Magnet Requirement (NOTE 2) | 85 Gauss Parallel |
| Temperature Range | -10~60℃(+14~140℉) |
| Shock (NOTE 3) | 30 G |
| Vibration (NOTE 4) | 9 G |
| Enclosure Classification | IEC 60529 IP67 (NEMA 6) |
| Protection Circuit | Surge Suppression, Reverse Polarity |
NOTE:
- WARNING: Never exceed rating (Watt=Voltage x Amperage). Permanent demage to sensor will occur.
- Measuring standard target: ø15.5Xø8X5t (Anisotropy rubber magnet)
- Sin wave / X , Y , Z 3 directions / 3 times each direction / 11 ms each time.
- Double amplitude 1.5 mm / 10Hz~55Hz~10Hz (Sweep 1 min) / X , Y , Z 3 directions / 1 hour each time.
- 1=None / 2=Short-circuit / 3=Power Source Reverse polarity / 4=Surge Suppression