CS-38 - For 4mm C-slot

Image

CS-38D, CS-38N, CS-38P

Image

SPECIFICATIONS

Type CS-38D CS-38N CS-38P
Wiring Method 2-Wire Type 3-Wire Type 3-Wire Type
Switching Logic Solid State Output, Normally Open Solid State Output, Normally Open Solid State Output, Normally Open
Sensor type - NPN Current Sinking PNP Current Sourcing
Operating Voltage 10~28V DC 5~28V DC 5~28V DC
Switching Current 4~20mA max. 50mA max. 50mA max.
Contact Rating (NOTE 1) 0.6W max. 1.5W max. 1.5W max.
Current Consumption - 10mA@24V DC max. 10mA@24V DC max.
Voltage Drop 3.5 V max. 0.5V@50mA max. 0.5V@50mA max.
Leakage current 0.8 mA max. 0.01 mA max. 0.01 mA max.
Indicator Red LED Red LED Red LED
Cable Ø2.6, 2C, PVC Ø2.6, 3C, PVC Ø2.6, 3C, PVC
Operating Frequency 1000Hz 1000Hz 1000Hz
Magnet Requirement (NOTE 2) 40 Gauss 40 Gauss 40 Gauss
Temperature Range -10~70℃ (+14~158℉) -10~70℃ (+14~158℉) -10~70℃ (+14~158℉)
Shock (NOTE 3) 50 G 50 G 50 G
Vibration (NOTE 4) 9 G 9 G 9 G
Enclosure Classification IEC 60529 IP67 (NEMA6) IEC 60529 IP67 (NEMA6) IEC 60529 IP67 (NEMA6)
Protection Circuit (NOTE 5) 4 3, 4 3, 4

NOTE:

  1. WARNING: Never exceed rating (Watt=Voltage x Amperage). Permanent demage to sensor will occur.
  2. Measuring standard target: ø15.5Xø8X5t (Anisotropy rubber magnet)
  3. Sin wave / X , Y , Z 3 directions / 3 times each direction / 11 ms each time.
  4. Double amplitude 1.5 mm / 10Hz~55Hz~10Hz (Sweep 1 min) / X , Y , Z 3 directions / 1 hour each time.
  5. 1=None / 2=Short-circuit / 3=Power Source Reverse polarity / 4=Surge Suppression
ADSENS
ADSENS